We are proud to release our new Evolved Drift Knuckles (steering arms) for Toyota's.

Based on years of feedback from pro drifters like Taka Aono, we have refined our drift knuckles into this reduced ackerman design for the best blend of steering angle and steering feedback.

Knuckles are made from billet machined steel, with solid 6061 outer tie rods. We've pocketed and lightened these as much as possible to reduce weight. 

Stainless offset pills and ball joint sleeve allow these to fit just about every oldschool Toyota from the AE86, to the MA60! These will fit 85mm, 87mm and 90mm strut casings, and fit all medium and large ball joint sizes.

You can use them "as is" to do what they are meant to do, or use them to get creative and put MA60 strut casings and brakes on your KE70 or AE86 for example! 

Want to use longer lower control arms from a larger sedan on your AE86 or TE72, but the LCA's have the larger Toyota ball joints? No problem. These will work for that too!

Two settings for the outer tie rod for adjustable steering quickness.

Outer tie rod spacers to allow adjustable bump steer on the knuckle.

If you need EXTRA long outer tie rods for your widebody build, let us know, we can always provide outer tie rod shafts in longer lengths.

We suggest these knuckles be used for dedicated drift car use only. The benefits built into them are specifically designed for drifting rather than road racing or street use. 



  • Easily adjustable on car
  • Strong enough for Rally Use
  • For dedicated drift cars only
  • Direct bolt on solution
  • More steering angle
  • More acceleration while sideways
  • So Many Possibilities!